Last straw

[Hammerhead]

(09-28-2019 )Lonestar10 Wrote:  Welp go figure rawze puts his magic eyeballs to work for 20 minutes. and lo and behold valve cam has slipped around 6 degrees.

(09-28-2019 )tree98 Wrote:  Exactly how is that diagnosed??

I wasn't there, and don't know how Rawze checked it, but I bar the motor to "Insert Pin" and insert the crank pin tool, then drop appropriate cam timing wedge in position and verify the wedge sit flush on the cam timing flat.
I check this when I do an overhead.