Last straw |
10-01-2019, (Subject: Last straw ) Post: #56 | |||
| |||
RE: Last straw retainer plate is supposed to arrive today. - Pulled the gears of the cams. BOTH gears were so easy to pull of, that it did not even get more than about 40 ft-lbs on the puller and they popped right off. Normally it takes 80 - 100+ ft-lbs on the puller to pull a gear off, especially the injector cam gear. They also both looked like they had some el-cheapo loc-tite blue on them, and it was very obvious that they never cleaned the mating surfaces at all. Makes me wonder what else in that inframe is incorrect. - I shutter to think about it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.