| Manual fan switch |
| 07-04-2016, (Subject: Manual fan switch ) Post: #1 | |||
| |||
| Manual fan switch My 2010 386 had no manual fan switch. But there was a plug hanging behind the dash for it. I bought a switch and installed it. The problem is: the cab controller recognizes the switch. You can see it turn on and off with PACAR ESA program. But the ecm doesn't see it. If you enable the switch function in INSITE the fan runs continuously, meaning it thinks the switch has malfunctioned. I had someone experienced with this look at it, and they said something in the drop down menu from the switch option in INSITE is missing. That's as far as they went at the time. Anyone have any idea where to go from here? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Manual fan switch - Mrkentee - 07-04-2016 RE: Manual fan switch - Rawze - 07-04-2016, RE: Manual fan switch - Unilevers - 07-04-2016, RE: Manual fan switch - Mrkentee - 07-04-2016, RE: Manual fan switch - Mrkentee - 07-05-2016, RE: Manual fan switch - Rawze - 07-06-2016, RE: Manual fan switch - biscuits and gravy - 07-06-2016, RE: Manual fan switch - Mrkentee - 07-06-2016, RE: Manual fan switch - gearhead - 07-08-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.