Last straw

[Rawze]

don't forget about the DOC and other components too.

did u test drive it with the exhaust pipe disconnected ?


-- You know, I once found a birds nest all burned up in a guys exhaust right at an elbow pipe. -- he swore he had no restrictions too.

Lastly, with all the stuff fixed now that has been found so far, there is more testing that can be done using CT. - Like extended fuelling state control logic conditions and other things. Also there are some audible tests that can be done to verify the injection timing mechanically vs what the computer says.

Also check the barro and ambient temp sensors and compare them to the local weather reports.

Bring it back by here some time and I can help you continue the chase if necessary. Maybe help u pull the turbo and have its exhaust and VG section inspected over at YTS.


Should try to locate those pics of the pistons too. if not, then we may have to boroscope it to see the spray pattern and style of piston it is to ensure they are correct.

does it pass an intake pressure test now? - did you test it before installing the rocker shafts?