New fuel pump installation 2250.

[snailexpress]

(01-03-2020 )JMBT Wrote:  Mine was timed to the gear pump from the factory. If I remember right though, it was a couple years ago, there was a little mark on the pump drive gear that needed to be inline with a notch on the housing of the pump. I turned the gear by hand to align marks, then installed it. Didn’t do anything special with the crank.

Pump has mark on the gear and I if my memory still serve it was on quickserve to align this mark with some other mark. Now quickserve procedure require special tool, remove gear pump and put this tool instead to align.
Some places mention to align mark on the gear to left upper mounting bolt hole. I'm not sure.
Hopefully Mr Hug will come here.