Broken exhaust manifold bolt CM870
01-15-2020, (Subject: Broken exhaust manifold bolt CM870 ) 
Post: #3
RE: Broken exhaust manifold bolt CM870
(01-15-2020 )Nostalgic Wrote:  It looks pretty close to being flush with the head. If it was me, I'd try a pick or small punch to try turning it first. If that didn't work, I'd mig a nut on it.

I had three broke off at same time on mine. Left handed drill bit done the deal on two, the other one had to mig a nut on. Good luck
replyreply
 Thanks given by: Chamberpains


Messages In This Thread
RE: Broken exhaust manifold bolt CM870 - TallBoy441 - 01-15-2020
RE: Broken exhaust manifold bolt CM870 - Unilevers - 01-15-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.