New guy

[2dlb]

(01-22-2020 )Waterloo Wrote:  

(01-22-2020 )Signature620 Wrote:  Looks like he didn't have enough time for the plus 60deg but had time for the 'anti-liability paint marks' lol

My motor was full of those when me and Rawze tore it down for the second in frame...

I recently got a new Snap on electronic Torque wrench. I know there very proud of there stuff but this has torque and degrees at the push of a button as well you can set it at a torque in say Ft Lb and toggle threw nm,inlb,and convert easy. Always had click type but this is kinda fun and im anal on torque. Tearing down a 2006 CM 870 that has 1,400,000 km on it and was warranty overhauled by a stealership at 358,000 and i cant believe it got this far the thing was put together with a gun.Had to drill out 4 pan bolts the front cover has 3 stripped holes, the rear cover has 2, They put silicone in to hold the bolts. They have never seen Rawzes tips on dropping some torque when fastening into aluminum and the windage pan or block stiffener had to cut off 4 bolts with a torch cause the heads were so f...ed up.