New guy
01-24-2020, (Subject: New guy ) 
Post: #20
RE: New guy
They've redesigned the pumps and the housing is cast iron now. They say the flow characteristics have changed and you may experience higher OR lower pressure but don't be worried if it's lower. No shims anymore. The new pumps are fairly whiney too.

There's a service bulletin about them - Basically says don't worry about oil pressure complaints with these new pumps unless there's fault codes! Hahah.
replyreply


Messages In This Thread
New guy - Blott4 - 01-21-2020,
RE: New guy - Rawze - 01-21-2020,
RE: New guy - Chamberpains - 01-22-2020,
RE: New guy - Signature620 - 01-22-2020,
RE: New guy - Waterloo - 01-22-2020,
RE: New guy - 2dlb - 01-22-2020,
RE: New guy - Blott4 - 01-22-2020,
RE: New guy - Rawze - 01-23-2020,
RE: New guy - tree98 - 01-22-2020,
RE: New guy - Signature620 - 01-22-2020,
RE: New guy - 2dlb - 01-23-2020,
RE: New guy - Waterloo - 01-23-2020,
RE: New guy - 2dlb - 01-23-2020,
RE: New guy - Chamberpains - 01-23-2020,
RE: New guy - JimT - 01-23-2020,
RE: New guy - Blott4 - 01-23-2020,
RE: New guy - Rawze - 01-23-2020,
RE: New guy - Running rough - 01-23-2020,
RE: New guy - Waterloo - 01-24-2020,
RE: New guy - Signature620 - 01-24-2020
RE: New guy - Mattman - 01-24-2020,
RE: New guy - 2dlb - 01-25-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.