Broken exhaust manifold bolt CM870
01-24-2020, (Subject: Broken exhaust manifold bolt CM870 ) 
Post: #29
RE: Broken exhaust manifold bolt CM870
Check your turbo actuator for smooth operation and is properly clocked, make sure the clamp on the hot side is tight as well! Mine was hanging up and causing chuffing due to it the vg ring not moving freely.
replyreply


Messages In This Thread
RE: Broken exhaust manifold bolt CM870 - Unilevers - 01-15-2020,
RE: Broken exhaust manifold bolt CM870 - marek4792 - 01-24-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.