| ECM CALIBRATION |
| 02-09-2020, (Subject: ECM CALIBRATION ) Post: #10 | |||
| |||
RE: ECM CALIBRATION (02-08-2020 )JimT Wrote: ... if the truck cab controller is a paccar product (mack, peterbilt, kenworth, etc) .. then they are well known for this issue where there are no engine codes, but the CEL light / dash controller has ghost errors in them. those things are flaky as hell. It is mentioned a lot on this forum in the past. here is one reference + solution. http://rawze.com/forums/showthread.php?t...8#pid48488 and... http://rawze.com/forums/showthread.php?t...2#pid10452 and... http://rawze.com/forums/showthread.php?t...28#pid1628 and... http://rawze.com/forums/showthread.php?t...1#pid46331 and there are many others. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
(Online)
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
ECM CALIBRATION - catnred - 02-07-2020, RE: ECM CALIBRATION - Waterloo - 02-08-2020, RE: ECM CALIBRATION - JimT - 02-08-2020, RE: ECM CALIBRATION - catnred - 02-08-2020, RE: ECM CALIBRATION - Waterloo - 02-08-2020, RE: ECM CALIBRATION - JimT - 02-08-2020, RE: ECM CALIBRATION - catnred - 02-08-2020, RE: ECM CALIBRATION - Rawze - 02-09-2020 RE: ECM CALIBRATION - catnred - 02-13-2020, RE: ECM CALIBRATION - Rawze - 02-14-2020, RE: ECM CALIBRATION - catnred - 02-16-2020, RE: ECM CALIBRATION - Chamberpains - 02-08-2020, RE: ECM CALIBRATION - Rawze - 02-08-2020, RE: ECM CALIBRATION - Brunolily - 04-22-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.