Replacing oil pump (should I do the dime mod?)
02-13-2020, (Subject: Replacing oil pump (should I do the dime mod?) ) 
Post: #1
Replacing oil pump (should I do the dime mod?)
My oil pressure at start up for the past couple of weeks has been 90 psi. I have changed the oil pressure sensor twice put a manual gauge on the block to see if dash gauge and scangauge are correct. They are. Cummins quick serve says only 4 things can cause high oil pressure and I would be eliminating 3 of them with a new pump. So while I'm doing it should I put the dimes in or not?    
replyreply


Messages In This Thread
Replacing oil pump (should I do the dime mod?) - Billy7871 - 02-13-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.