Replacing oil pump (should I do the dime mod?)
02-13-2020, (Subject: Replacing oil pump (should I do the dime mod?) ) 
Post: #5
RE: Replacing oil pump (should I do the dime mod?)
(02-13-2020 )Billy7871 Wrote:  My oil pressure at start up for the past couple of weeks has been 90 psi. I have changed the oil pressure sensor twice put a manual gauge on the block to see if dash gauge and scangauge are correct. They are. Cummins quick serve says only 4 things can cause high oil pressure and I would be eliminating 3 of them with a new pump. So while I'm doing it should I put the dimes in or not?

acutal high oil pressure could also be a failure or blockage in the front structure gasket.

any recent inframe or front structure gasket/geartrain work?


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Replacing oil pump (should I do the dime mod?) - Rawze - 02-13-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.