Helped forum member 'T800 cm871' the other day ...

[Rawze]

yestersday, he PM's me again...

T800 cm871 Wrote:1. What were the sensors that you said I needed to replace
2. What kind of plug on the computer is required to hook up to the inline six box.
3. Can you send me a copy of the tune that is on my truck just to save.
4. Is there anything else on the engine that I should be concerned about doing at the 250k mark.

Also what was the website to be able to get service invo from Cummins. Also we’re was it that is can get INSITE for free going to try and get a pc tomorrow. Thanks again

Thanks again so much for your time really did appreciate it.

1). The same sensors (except for the delta-p) as required for an egr-tune-up. The IMAP and Exhaust back-pressure sensors. Also ensure the exhaust bp sensor feed-pipe circuit is not clogged up.

2). ref: http://rawze.com/forums/showthread.php?t...2#pid49432

3). I just sent you a copy of the corrected programming, so that you have it in case your ecm ever gets wiped out, perhaps someday needs replacing in the future, etc.

4). Read my book (top of forum) -- and Here is an updated example maintenance schedule you can print and do for yourself. http://rawze.com/forums/showthread.php?t...0#pid26680 <- I fill one of these out just about every time my truck comes home, before leaving back out.

AND the website .. here is a reference for that too: http://rawze.com/forums/showthread.php?t...7#pid44967