CM 871 Timing
03-15-2020, (Subject: CM 871 Timing ) 
Post: #13
RE: CM 871 Timing
(03-15-2020 )2dlb Wrote:  
(03-15-2020 )Rawze Wrote:  the one with the 6-point nut is harder to spool up and is less fuel efficient.

yet there both the same assy number, So if i ordered a reman from cummins i wonder which one you would get.If you zoom in on the compressor wheel u can see clearance on the side, is this ok or is it worn

ask to inspect it before puchase.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: 2dlb


Messages In This Thread
CM 871 Timing - 2dlb - 02-03-2020,
RE: CM 871 Timing - Rawze - 02-04-2020,
RE: CM 871 Timing - 2dlb - 03-12-2020,
RE: CM 871 Timing - Waterloo - 03-12-2020,
RE: CM 871 Timing - 2dlb - 03-14-2020,
RE: CM 871 Timing - Rawze - 03-14-2020,
RE: CM 871 Timing - 2dlb - 03-15-2020,
RE: CM 871 Timing - 2dlb - 03-14-2020,
RE: CM 871 Timing - Rawze - 03-15-2020,
RE: CM 871 Timing - 2dlb - 03-15-2020,
RE: CM 871 Timing - Rawze - 03-15-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.