Electrical Test Lead Kit

[snailexpress]

(03-23-2020 )kozakvod Wrote:  The Cummins "test lead kit" Part Number 5299367 that QuickServe says I need in order to properly test the connectors, etc.

I'm still having Code 3567 going active so obviously there's something going on with either an intermittently bad doser or the connector (MY SUSPICION) or wires to the ECM or or or

My challenge is physically getting to doser side connector because my SCR on the left side, DPF on the right side and the drive line smack dab in the middle of the two with the Decomp tube and doser setting way up above them. Point is I can't even see the inside of the doser side connector to make sure I get my meter probes accurately on the pins to check resistance.

The Cummins test lead kit is $230 online. Does anyone know of a lesser expensive option that would work for my situation?

Do you remember or have it on paper the doser valve part number. If valve is same as any other trucks use you can buy plug with terminals to make test leads.
almost any connectors, terminals (male or female) you can find on Mouser or Digikey online store. Also you need tool to disassemble plug terminals.
https://amzn.to/3afHjl1
or something similar.