Isx 15 2350 valve lash

[Blackfoot]

(04-02-2020 )Rawze Wrote:  STOP WATCHING YOUTUBE GARBAGE!!!!! -- REGISTER YOUR ENGINE ON QUICKSERV.COM ... ALL THE PROCEDURES AND PROPER SETTINGS ARE THERE!

IT IS ABSOLUTELY FREE!

Intake on the ISX CM870, CM871, CM2250, and CM2350-X101 is 0.014" (some guys will use 0.015", this is ok too), the exhaust valves are 0.027", and the engine brake is 0.276".

Go look it up for yourself on quickserv using your enigne ser# to be sure about it!.

Thanks for the help Rawze, Just got registered with Quickserve. Took a short spin on their site and found all I need to know. Thanks again. OH! by the way, I would stop watching YouTube garbage, But most of what I watch are your videos lol.