Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / Replace the transfer fuel pump.

new reply
Replace the transfer fuel pump.
07-25-2016, (Subject: Replace the transfer fuel pump. ) 
Post: #41
Hammerhead Offline
Kookoo for Cocoa Puffs  (1922 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1922 thank(s) in 741 post(s)
RE: Replace the transfer fuel pump.
(07-24-2016 )overshot Wrote:  
(07-24-2016 )overshot Wrote:  My cm2250 was built in late 2011. Would it have the ceramic plungers? Would I have to remove the pump to disassemble it to check to see what plungers it has? Also, is it very difficult to update or require special tools.

Nevermind, I looked it up on QS. Looks pretty simple
Please share an overview, your findings, & your results...never know what the future may hold for any of us after all

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Replace the transfer fuel pump. - Unilevers - 07-22-2016,
RE: Replace the transfer fuel pump. - Hammerhead - 07-25-2016
RE: Replace the transfer fuel pump. - Unilevers - 08-07-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication