CM871 kickin my Butt

[RustyWood]

Rawze thanks so much for your time, I took 2 pictures when Dave was showing me my program on his Insite, and since I can't remember how to post pictures I'll type what I see here, also I just checked the DPF can and it looks like the Data plate is missing, I just put it back together yesterday and only just now noticed a slightly shiner rectangle where I think it was, but it is the large 12" size.

Anyhoo, the 2 pictures Dave said I'd want,
under folder System Information:
Advertised Power at RPM = 475 HP
Advertised Power RPM = 1800 RPM
Control Parts List = 3748
Fuel Code = FC0P820
Governed Speed = 2100 RPM
Peak Torque at RPM = 1650 Ft/Lbs
Peak Torque RPM = 1200 RPM

OEM Info Folder
OEM Name = Kenworth
OEM Vehicle Model = T2000
VIN / ESN = 239959J
Veh or Equp Year = 10-2009
Accelerator IntLock = Disable
Accelerator Options = Blank
Dual Accelerator = Enable
Adjustable Low Idle Speed = 700 RPM
Low Idle Spped Adjust. = Enable
Aftertreatment
Diesel Particulate Filter = Blank
Active Regen in PTO = Disable and my picture is clipped there on that one.

Picture 2
System ID & Data Plate
Calibration Software Phase = 8000063
Cal Time/Date Stamp = 070213185234
DO Option = 1496
ECM Code = AV10235. 10
Other options = Blank
SC Option = 12062
Customer Info
Customer Location = Redding, Ca
Customer Name = Hemsteds
Customer Unit # = 9
ECM Info
ECM NAme = CM871
ECM Part # = 3684275
ECM Serial # = 5008588
Engine Info
Engine Build Date = 122107
Engine Make = CMMNS
Engine Model = 6X1u07D15000
ESN = 79287222 and that's where that picture cuts off.

This is as much as I know about this truck, don't know who Hemsted is but I was told by seller it was used to haul Stage Equipment. I don't know if that means a Band owned it or some other type "Stage Equipment", but the truck was in very nice shape.

I'm reading your link on Increasing Horsepower, very amazing the knowledge you have, and great experience with these engines and I thank you very much for your time, if you are ever in my Neck of the Woods in North Idaho, just North of Coeur'd Alene the Beers and Dinner is on us, maybe with your training I can be a help ISX Owners in a pinch in this area when I'm home.