crank case pressure
02-28-2016, (Subject: crank case pressure ) 
Post: #4
RE: crank case pressure
I had the same issue. I changed filters, sensor and drilled the filter out.... then I checked the wiring. my wires were weak about a inch from the plugs clip. Cummins sells a pigtail so I just spliced in a new one.
replyreply


Messages In This Thread
crank case pressure - scowman - 02-26-2016,
RE: crank case pressure - Cuya - 02-26-2016,
RE: crank case pressure - Brock - 02-28-2016
RE: crank case pressure - ynot - 03-05-2016,
RE: crank case pressure - ynot - 03-05-2016,
RE: crank case pressure - Vin - 07-23-2016,
RE: crank case pressure - Vin - 07-24-2016,
RE: crank case pressure - Cuya - 01-23-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.