Cut an access panel in the floor or find another way?

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-28-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cut an access panel in the floor or find another way?

07-19-2020, (Subject: Cut an access panel in the floor or find another way? )

Post: #15

StillTrucking Offline

Offline

Established (0 Likes)

Posts: 2
Joined: Jul 2020

Thanks: 0
Given 0 thank(s) in 0 post(s)

RE: Cut an access panel in the floor or find another way?

On a Cascadia I removed the drive shaft and the cab shocks and carefully jacked the cab as high as I could. I blocked it up too. It was still really tight but it worked. It is not easy working through a shifter hole either. It would be great to have large access hatch if you have the time to fabrication it.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - JimT - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Nostalgic - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Lonestar10 - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - JimT - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - Chamberpains - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - StillTrucking - 07-19-2020

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - barf - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-19-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design