Helping JimT out with an inframe ...

[Volvo8873]

(08-10-2020 )tree98 Wrote:  

(08-10-2020 )Rawze Wrote:  

(08-09-2020 )JMBT Wrote:  ... what did you use on the manifold bolts to get them out easy?

gently nudging them loose in tiny increments with a 1/2" electric impact so they would not break.

Gently with an impact?? Those two words don't usually go together. I would think an impact would be a lot harder on them than a 3/8 ratchet.

As long as the impact has a variable trigger like most do along with patience it would not be an issue I would think.