Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Your Daily Blog / Busy busy busy!

new reply
Busy busy busy!
08-12-2020, (Subject: Busy busy busy! ) 
Post: #6
Evotrucker Offline
Established  (189 Likes)  **

 		Posts: 425
Joined: Mar 2018
Thanks: 130
Given 189 thank(s) in 105 post(s)
RE: Busy busy busy!
So here is the picture of what the carrier bearing looked like, the old one. The new one went on surprisingly with little effort. That was a learning experience! But a good one at that. I had help tho from a couple of Volvo mechanics, tho muscling it around on and off wasn’t fun. Especially the other drive shaft was a and is a SOB to take on and off. Will do that job some this month or next month.


Attached File(s)Thumbnail(s)
      

User's Signature: The creator said " Help your self and I will help you; Protect your self and I will protect you "
Return to Top | find
replyreply
new reply


Messages In This Thread
Busy busy busy! - Evotrucker - 08-12-2020,
RE: Busy busy busy! - Rawze - 08-13-2020,
RE: Busy busy busy! - hhow55 - 08-12-2020,
RE: Busy busy busy! - Evotrucker - 08-12-2020
RE: Busy busy busy! - Ricky - 08-12-2020,
RE: Busy busy busy! - Baco74 - 08-13-2020,
RE: Busy busy busy! - hhow55 - 08-13-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication