Chopped tires
10-10-2020, (Subject: Chopped tires ) 
Post: #9
RE: Chopped tires
(10-10-2020 )Daytripper Wrote:  Ok...I have replaced the torque rods....replaced all the wheel bearings, seals ect. How do you test for worn eye bushings...visually they look pretty good...want to be sure before I put new drives on for the winter...

Also on 3 of the leaf springs the lowest leaf makes a clinking/ rattling noise going over bumps....It must be common because I've heard the same noise from other international trucks like this one.
Post last 8 of your VIN. I think there is a kit for that depending on specific suspension. I can probably find the part number somewhere in my archives.
replyreply


Messages In This Thread
Chopped tires - Daytripper - 08-25-2020,
RE: Chopped tires - Rawze - 08-25-2020,
RE: Chopped tires - Magard - 08-25-2020,
RE: Chopped tires - Magard - 08-25-2020,
RE: Chopped tires - DVT873 - 10-10-2020,
RE: Chopped tires - Daytripper - 10-11-2020,
RE: Chopped tires - Waterloo - 08-25-2020,
RE: Chopped tires - Daytripper - 10-10-2020,
RE: Chopped tires - DVT873 - 10-10-2020
RE: Chopped tires - Daytripper - 10-11-2020,
RE: Chopped tires - DVT873 - 10-11-2020,
RE: Chopped tires - Lonestar10 - 10-11-2020,
RE: Chopped tires - Nostalgic - 10-11-2020,
RE: Chopped tires - Lonestar10 - 10-11-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.