Adjust throttle response in Insite
12-25-2020, (Subject: Adjust throttle response in Insite ) 
Post: #17
RE: Adjust throttle response in Insite
(12-22-2020 )LRT1549 Wrote:  
(12-21-2020 )marek4792 Wrote:  Have an x15 and it is not snappy unless I load the clutch too much or too much fuel. Try loading the clutch without giving it fuel.

Not Sure what you mean by loading the clutch, however if your giving that engine fuel as you let out the clutch like you would in a car STOP DOING THAT Your slipping the clutch and dramatically reducing it's life... Go kick whoever taught you to do that to a truck square in the arse and tell them to learn how to drive a damn truck....

Never... and I mean NEVER give a diesel engine fuel while letting out the clutch. The engine will give it's self all the fuel required to stay running, just learn how to let out a clutch properly.. It's a truck not a damn race car, you don't slam the fuel and dump the clutch......EVER!!!!!!!
What I was getting at was there are situations where loading the clutch maybe required like for instance starting up a 5 percent incline at gross in first gear and a little bit of fuel may be needed to prevent yourself from stalling out, but not getting the footwork right would lead to chirping tires and bucking shuttering and/or stalling out. I've driven some older cars if you didn't load the clutch would stall out especially uphill. Not reflecting on how I drive now, but I'm simply speaking from experience learning on my own how to drive...
replyreply


Messages In This Thread
RE: Adjust throttle response in Insite - marek4792 - 12-25-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.