RIP CM2250, 2013, 800,000km 20,000 hrs |
01-29-2021, (Subject: RIP CM2250, 2013, 800,000km 20,000 hrs ) Post: #8 | |||
| |||
RE: RIP CM2250, 2013, 800,000km 20,000 hrs Thanks folks. Likely going down the rebuild line (swapping to an older motor is in the 60k range, and in terms of resale... there are no dumps in BC that really have this swap [at least what i am aware of]). Dollars are rising on the new build, official quote from Peterbilt is at 55k + taxes on the motor. Talked to cummins about ordering new head vs reman. NX is no longer available according to them. RX is 8500, brand new is 10,000. Catch is, brand new i have to pay 1K additional to unreserve it and then it'll be shipped here from Michigan, where they have a total of 4 available. For 2,500 it seems like a no brainer BUT. To Waterloo's point, if the RX is in stock here, i could gamble on ordering it and opening it up (if it says NX i'm golden, if it says RX, i return and I lose a few days.). | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.