2014 ISX oil temp

[BDiscovery]

(02-06-2021 )Rawze Wrote:  

(02-06-2021 )BDiscovery Wrote:  Its factory new crate from cummins, CM-2350, no ecm fiddling. 220 almost all the time hits 245 loaded on big hills.

maybe high?. it should be floating 215 - 218~ish and maybe and 230 in a hard pull.

at 240, it starts to derate the engine.

post a couple pics of the engine ser# / data-plate info ... and post a pic of what Insite is telling you for what program is in the ecm, etc.

also, was it a long-block or short-block? ... what came out of the truck and and what else was done?

might want to replace the oil temp sensor to ensure it is not reading higher than normal.

Was the old turbo re-used?. or a new one that matches the engine CPL installed?

Does the new engine CPL match the old engine cpl? ... what was the old engines ser#?

What is the water temp usually?

I don't have insite or my connectors yet to get that info.

It was a long block, I bought the truck right after it was done.

I'll check the cpl's and post them.

Water temp can be at 185 oil still reads 220.

I'll change out the oil temp sensor.