Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Pete & KW related Help... / Looking for help/advice on truck ...

new reply
Looking for help/advice on truck ...
02-25-2021, (Subject: Looking for help/advice on truck ... ) 
Post: #3
Rawze Offline
Forum Reject  (14143 Likes)  *******

 		Posts: 11,345
Joined: Jun 2013
Thanks: 6012
Given 14143 thank(s) in 6229 post(s)
RE: Looking for help/advice on truck purchase
(02-25-2021 )Willy1823 Wrote:  Alright so I’m learning here and trying to figure this out. I have 3.55 with a 13 spd.
...
I run all over the country. Most of the time I’m running heavy, but sometimes I’m hauling insulation. What your telling me is keeping the truck around 1600 rpms when I’m heavy, and keep it on the lower side when I’m light? Just wanna make sure I’m understanding this?

here is how i drive...
http://rawze.com/forums/showthread.php?t...8#pid24378

and yeah, if you keep it 1500+ when pulling hard instead of lugging it below 1400, the engine will last much longer.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Looking for help/advice on truck purchase - Rawze - 02-25-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication