CM870 power loss
05-18-2021, (Subject: CM870 power loss ) 
Post: #11
RE: CM870 power loss
(05-18-2021 )Nilao Wrote:  
(05-18-2021 )Redland1 Wrote:  I took the air line off to the actuator and tried to move it by hand but it wouldn’t move so I put air pressure to it and it moved a good amount but if didn’t hear the turbo once the rod moved down.

Yeah, that spring inside the actuator is VERY stout lol.

So when I hooked up the air and the rod moved downward should I have been able to hear the turbo spooling?
replyreply


Messages In This Thread
CM870 power loss - Redland1 - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Rawze - 05-17-2021,
RE: CM870 power loss - Nilao - 05-17-2021,
RE: CM870 power loss - Nilao - 05-18-2021,
RE: CM870 power loss - Redland1 - 05-18-2021
RE: CM870 power loss - Rawze - 05-20-2021,
RE: CM870 power loss - Nilao - 05-20-2021,
RE: CM870 power loss - Rawze - 05-20-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.