| Drive shaft alignment |
| 08-08-2021, (Subject: Drive shaft alignment ) Post: #5 | |||
| |||
RE: Drive shaft alignment (08-06-2021 )Chamberpains Wrote: You can loosen the mount bolts the cross member and see if it'll slide the way you want to. There may be just enough slop in them. Also the holes on the mount at the carrier bearing are usually slotted for adjustment. It slides fore and aft, but not sideways. Or, at least, just a little bit. Not much. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Drive shaft alignment - Mrkentee - 08-06-2021, RE: Drive shaft alignment - Rawze - 08-06-2021, RE: Drive shaft alignment - hookliftpete - 08-06-2021, RE: Drive shaft alignment - Chamberpains - 08-06-2021, RE: Drive shaft alignment - Mrkentee - 08-08-2021 RE: Drive shaft alignment - snailexpress - 08-08-2021, RE: Drive shaft alignment - stevegrutz - 08-08-2021, RE: Drive shaft alignment - Rawze - 08-08-2021, RE: Drive shaft alignment - Mrkentee - 08-15-2021, RE: Drive shaft alignment - snailexpress - 08-15-2021, RE: Drive shaft alignment - Mrkentee - 08-18-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.