Main, rod bearing and oil pump

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-23-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Main, rod bearing and oil pump

09-06-2016, (Subject: Main, rod bearing and oil pump )

Post: #3

jimeneztrans84 Offline

Offline

Established (111 Likes)

Posts: 424
Joined: Jan 2016

Thanks: 0
Given 111 thank(s) in 64 post(s)

RE: Main, rod bearing and oil pump

What's the oil psi at full operating temperature? I did my bearings and pump and it's still the same 16-18 psi at idle and 36-38 at rpm going down the road. I'm going to shim the pump with 8 dimes next oil change. I tried 1 gallon of gear oil but only got 1-2 psi extra.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Main, rod bearing and oil pump - gatow900 - 09-06-2016,

RE: Main, rod bearing and oil pump - gatow900 - 09-06-2016,

RE: Main, rod bearing and oil pump - jimeneztrans84 - 09-06-2016

RE: Main, rod bearing and oil pump - gatow900 - 09-06-2016,

RE: Main, rod bearing and oil pump - jimeneztrans84 - 09-06-2016,

RE: Main, rod bearing and oil pump - Vin - 09-06-2016,

RE: Main, rod bearing and oil pump - Unilevers - 09-06-2016,

RE: Main, rod bearing and oil pump - Rawze - 09-06-2016,

RE: Main, rod bearing and oil pump - in2trux - 09-06-2016,

RE: Main, rod bearing and oil pump - jimeneztrans84 - 09-06-2016,

RE: Main, rod bearing and oil pump - in2trux - 09-06-2016,

RE: Main, rod bearing and oil pump - Hammerhead - 09-06-2016,

RE: Main, rod bearing and oil pump - redbeard - 09-06-2016,

RE: Main, rod bearing and oil pump - gatow900 - 09-07-2016,

RE: Main, rod bearing and oil pump - Sergiu - 09-07-2016,

RE: Main, rod bearing and oil pump - Hammerhead - 09-07-2016,

RE: Main, rod bearing and oil pump - Mr Hagg - 09-07-2016,

RE: Main, rod bearing and oil pump - gatow900 - 09-07-2016,

RE: Main, rod bearing and oil pump - Mr Hagg - 09-07-2016,

RE: Main, rod bearing and oil pump - Hammerhead - 09-07-2016,

RE: Main, rod bearing and oil pump - gatow900 - 09-09-2016,

RE: Main, rod bearing and oil pump - jimeneztrans84 - 09-09-2016,

RE: Main, rod bearing and oil pump - Hammerhead - 09-09-2016,

RE: Main, rod bearing and oil pump - Vin - 09-08-2016,

RE: Main, rod bearing and oil pump - gatow900 - 09-09-2016,

RE: Main, rod bearing and oil pump - jimeneztrans84 - 09-09-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design