RIP CM2250, 2013, 800,000km 20,000 hrs |
04-13-2022, (Subject: RIP CM2250, 2013, 800,000km 20,000 hrs ) Post: #58 | |||
| |||
RE: RIP CM2250, 2013, 800,000km 20,000 hrs (04-13-2022 )Hermjeji Wrote: ...My thought is I should be good replacing just the head, i'll inspect the cam and rollers when it's off. But pretty shocked at the condition after 1 year and 2 months. Yep, replace the head and inspect the internals while it's off. The new head will come with barrel/plunger assemblies pre-installed. You'll also need the head gasket. I just did this within the last year or so because of the same issue. There's no repairing, only replacement unfortunately. Judging off that video, it's been leaking for quite awhile. Here's the thread from last year about this issue - http://rawze.com/forums/showthread.php?tid=7266 *It is odd that a 'new' pump would fail so soon. Was this a brand new pump or a used one? | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.