| CM871 broken Turbo Clamp on boost side |
| 05-04-2022, (Subject: CM871 broken Turbo Clamp on boost side ) Post: #2 | |||
| |||
| RE: CM871 broken Turbo Clamp on boost side Replace the clamp, check your shaft for play and make sure it didn't chew into the housing. Remove the outlet horn (to the cac) before you start it and make sure it's not pushing out oil. (with no back pressure, some oil may be present). | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM871 broken Turbo Clamp on boost side - tariqzai - 05-04-2022, RE: CM871 broken Turbo Clamp on boost side - Nostalgic - 05-04-2022 RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-05-2022, RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-06-2022, RE: CM871 broken Turbo Clamp on boost side - Rawze - 05-04-2022, RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-05-2022, RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-06-2022, RE: CM871 broken Turbo Clamp on boost side - Rawze - 05-06-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.