CM871 broken Turbo Clamp on boost side

new reply

Threaded Mode | Linear Mode

CM871 broken Turbo Clamp on boost side

05-05-2022, (Subject: CM871 broken Turbo Clamp on boost side )

Post: #5

tariqzai Offline

Contributing Member (2 Likes)

Posts: 28
Joined: Jul 2016

Thanks: 6
Given 2 thank(s) in 1 post(s)

RE: CM871 broken Turbo Clamp on boost side

(05-04-2022 )Nostalgic Wrote: Replace the clamp, check your shaft for play and make sure it didn't chew into the housing. Remove the outlet horn (to the cac) before you start it and make sure it's not pushing out oil. (with no back pressure, some oil may be present).

Thanks, I will do that.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

CM871 broken Turbo Clamp on boost side - tariqzai - 05-04-2022,

RE: CM871 broken Turbo Clamp on boost side - Nostalgic - 05-04-2022,

RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-05-2022

RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-06-2022,

RE: CM871 broken Turbo Clamp on boost side - Rawze - 05-04-2022,

RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-05-2022,

RE: CM871 broken Turbo Clamp on boost side - tariqzai - 05-06-2022,

RE: CM871 broken Turbo Clamp on boost side - Rawze - 05-06-2022,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.