VGT Actuator Issues
08-10-2022, (Subject: VGT Actuator Issues ) 
Post: #9
RE: VGT Actuator Issues
(08-10-2022 )RMezaJr Wrote:  ...
The needle on the turbo gauge goes up to about 15 psi and stops. Every once in a while it will go to around 30 which is the normal psi but will fluctuate back down and then go back up.

IT SOUNDS TO ME SO FAR THAT YOU HAVE NO IDEA IF THE ENGINE COMPUTER IS TELLING IT TO DO THAT ...OR IF IT IS ACTUALLY ACTING UP!!!... STOP ASSUMING IT IS THE ACTUATOR BLINDLY!!!!

I SAW NO POSITIONING ERROR CODES IN YOUR POST ABOVE!. ONLY COMMUNICATIONS ERRORS!. FOR ALL ANYONE KNOWS, IT COULD BE A LOOSE DAMN WIRE, OR A PROBLEM ON THE J1939 NETWORK.

ALSO.. HAS ANYONE BOTHERED TO DO A PROPER TURBO INSPECTION???..
REF: https://youtu.be/ZUpKb5umv_0


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
VGT Actuator Issues - RMezaJr - 08-10-2022,
RE: VGT Actuator Issues - Rawze - 08-10-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.