Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Questions on my isx 15_continued

new reply
Questions on my isx 15_continued
11-14-2022, (Subject: Questions on my isx 15_continued ) 
Post: #1
Nhramember Offline
Established  (4 Likes)  **

 		Posts: 92
Joined: Nov 2019
Thanks: 0
Given 4 thank(s) in 4 post(s)
Hello everyone. Code 4691 help
   Ok I put the retaining rings in my 2015 kw isx15. I put everything back now when I spin it over it gives me code 4691. What could cause this? Could I have not put the rings in far enough? I used the tool Cummins sold for the job? I tightened it all the way down like it was suppose to be. Any ideas are welcome thanks Nate
Return to Top | find
replyreply
new reply


Messages In This Thread
Hello everyone. Code 4691 help - Nhramember - 11-14-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication