Questions on my isx 15_continued

[Nhramember]

Gm Rawze and everyone. Im still dealing with no rail pressure . I put new fuel tubes in and torqued them to specs. When I pulled the injectors did they need to be programmed again . I over torqued the fuel tubes so I put 6 new in . Could I have damaged the injectors because it spins over no start no rail pressure. Before I take it to Cummins ? Im a good mechanic just new to the common rail system. Thanks for the help I can post pics of the old tubes if anyone wants to see the tips. Number 1 had a indent in the tip.