X15 Turbo Actuator failure?

[tree98]

Did someone have the actuator off right before this started happening? If so they might not have calibrated it and now the ecm doesn't know what position it's in. To me it sounds like the turbo is choking the engine off. You don't show a clear view of the tach in those videos but from what I could tell it doesn't appear to be rev-ing it seems to be dropping rpm from idle speed.

If you had insite you could take the actuator off and inspect the turbo VG ring

https://youtu.be/ZUpKb5umv_0

and if it checked out you could then calibrate the actuator and put it back on.

You could also run the hysteresis test (turbo test)with insite, and a fuel system leakdown test.............for about $300 you could get an inline adapter and the software needed to stay far away from the parts changers who will only drain your bank account and leave you stuck on the side of the road somewhere. What exactly was the inactive code that it had? We're all just blindly guessing here with zero information to go on.