Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / New to me cm871

new reply
New to me cm871
03-22-2023, (Subject: New to me cm871 ) 
Post: #20
Scoot5869 Offline
Established  (10 Likes)  **

 		Posts: 75
Joined: Mar 2019
Thanks: 34
Given 10 thank(s) in 7 post(s)
RE: New to me cm871
And I’m pretty sure my egr cooler is plugged from water pump and then theres a plate on the bottom where it goes to the block. I suppose that’s not letting coolant to the back cylinders as well? My egr cooler was leaking and that’s what I was told to do as well. My temps have always been normal I don’t run it hard and keep an eye on my gauges.

User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio
Return to Top | find
replyreply
new reply


Messages In This Thread
New to me cm871 - Scoot5869 - 03-20-2019,
RE: New to me cm871 - Rawze - 03-20-2019,
RE: New to me cm871 - Rawze - 03-20-2019,
RE: New to me cm871 - Waterloo - 03-20-2019,
RE: New to me cm871 - Rawze - 03-22-2023,
RE: New to me cm871 - Rawze - 03-22-2023,
RE: New to me cm871 - Rawze - 03-22-2023,
RE: New to me cm871 - Rawze - 03-22-2023,
RE: New to me cm871 - Scoot5869 - 03-22-2023
RE: New to me cm871 - Rawze - 03-23-2023,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication