Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Actuator failure being caused by bad de-mandate tune?

new reply
Actuator failure being caused by bad de-mandate tune?
03-25-2023, (Subject: Actuator failure being caused by bad de-mandate tune? ) 
Post: #10
BRUDER01 Offline
Established  (0 Likes)  **

 		Posts: 9
Joined: Mar 2023
Thanks: 8
Given 0 thank(s) in 0 post(s)
RE: Actuator failure being caused by bad delete tune?
(03-23-2023 )Rawze Wrote:  As far as things being unplugged.. you need to check out the wiring harness for proper terminating resistors. Issues like that could be a lot of the trouble with he turbo actuator.. like mr. hag mentioned... and can actually cause actuator failures too.

Here is some more detailed info on that...
http://rawze.com/forums/showthread.php?t...6#pid67656

Checked the “weather pack connector” found in that other thread. Showing 60ohm
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Actuator failure being caused by bad delete tune? - BRUDER01 - 03-25-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication