New(to me) truck with unknown tuning.

[mattdm]

(07-17-2023 )Rawze Wrote:  If your trying to do things by yourself, you could definitely use the official Africa-'J' overlay for the 2250's, and not the outdated G version. You will also need to adjust your boost tables according to the make/model truck you have. It does work well, but it is not how I do things when someone sends me a file to fix up for them. Africa-'J' is very reliable, safe, and stable when done right. many people do use it. Personally however, I do not use it. I am not a fan of using blocked faults to make things go away, but rather would shut things in the system off properly and be more thorough with everything.

Would you be willing to fix up a stock calibration for me? Ill flash it and run it for 10 minutes and then pull it back off.

I was exploring the calibration files last night and found the Access sheet that breaks down each calibration along with its power levels. Is it safe to use the 600hp file on this motor for slightly more power?

Original File was based on CL10114, From my research CL10105 would be the factory 600hp Tune for this motor.