Autoshift gets stuck in 10 gear

[sbtrucking]

(09-26-2016 )Mr Hagg Wrote:  Need to check the power feed from the battery box. I have saw where the fuse holder would heat up and drop load power thus causing it after a long run it will not shift when called upon. Find someone with road ranger and have them hook up and retrieve the codes then you can look at the sensors. When Ever I have had the input speed sensor fault it would not go into gear at all. But have replace many transmission harnesses.

It has a power loss somewhere it still gives a code on insite,
I think that may be causing it.