Metering actuator issue |
04-18-2024, (Subject: Metering actuator issue ) Post: #3 | |||
| |||
RE: Metering actuator issue I have not done the leak test yet. Mostly because I replaced all the injectors a year ago not that they can’t go bad again. It will be a few days before I can get back to working on it now. Hoping to test harness this evening and double check that I didn’t get a bad actuator. User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Metering actuator issue - Scoot5869 - 04-17-2024, RE: Metering actuator issue - Rawze - 04-18-2024, RE: Metering actuator issue - Scoot5869 - 04-18-2024 RE: Metering actuator issue - tree98 - 04-18-2024, RE: Metering actuator issue - Rawze - 04-18-2024, RE: Metering actuator issue - Scoot5869 - 04-18-2024, RE: Metering actuator issue - Scoot5869 - 04-19-2024, RE: Metering actuator issue - JimT - 04-19-2024, RE: Metering actuator issue - Rawze - 04-19-2024, RE: Metering actuator issue - Scoot5869 - 04-19-2024, RE: Metering actuator issue - Scoot5869 - 04-19-2024, RE: Metering actuator issue - Scoot5869 - 05-15-2024, RE: Metering actuator issue - Rawze - 05-15-2024, RE: Metering actuator issue - Scoot5869 - 05-15-2024, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.