calling any series 60 gurus...

[Btech]

(11-04-2024 )TomHanson Wrote:  I did replaced the remaining lines, and I cannot get this thing running correctly. It will run off ether and smoke like a sieve. if my injection timing is correct, that should mean my cam is fine right?? Detroit recommended tossing the old injectors back in and trying that, which I will do this morning...

If injector lobe lift position is correct then there shouldn't be a issue with the cam.
I will say the last 6 pack of injectors I installed from Detroit, 3 of them were bad out of the box.