ISX CM2350

[Rawze]

(12-25-2024 )Ravenwood Wrote:  I run a demandated 600 hard pulling 143,00 to 150,000 lbs of logs off the mountains. My oil temp does get up there daily , I use Chevron 15w40 so what intervals in hrs would you recommend and what weight of gear oil?
Thanks in advance

does not matter how well you think it runs... if that program has not been reviewed, then it needs to be copied from the ecm, then e-mailed to me, so that it can be checked for correctness. For all anyone knows, it could have too much injection timing in it, or no operating mode control re-mapping, incorrect fuel-air-mix, etc. and causing the oil to run hotter than it should.