| CM 871 head gasket up date |
| 01-12-2025, (Subject: CM 871 head gasket up date ) Post: #8 | |||
| |||
RE: CM 871 head gasket up date (01-11-2025 )heavy hauler Wrote: Here is my attempt to upload the picture again, I tried to lower the resolutions as stated. thank you for clarifying the small impressions, that makes sense because they are so uniform through out the gasket. But I will admit it was a good observation regardless. The deck ended up having some erosion just as everyone has , and had stated from the beginning. Has anyone ever used Balzona epoxy to cure the imperfections? Then putting the thin film of permetex ? the machine shop that went through my head had highly suggested it and stated ver good long term success with this tactic. Most of us guys just simply use a light film of detroit jelly (anaerobic sealant) in that area, and that works just fine. info: http://rawze.com/forums/showthread.php?t...4#pid59154 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM 871 head gasket up date - heavy hauler - 01-05-2025, RE: CM 871 head gasket up date - tree98 - 01-05-2025, RE: CM 871 head gasket up date - heavy hauler - 01-06-2025, RE: CM 871 head gasket up date - heavy hauler - 01-06-2025, RE: CM 871 head gasket up date - Rawze - 01-07-2025, RE: CM 871 head gasket up date - Signature620 - 01-07-2025, RE: CM 871 head gasket up date - heavy hauler - 01-11-2025, RE: CM 871 head gasket up date - Rawze - 01-12-2025 RE: CM 871 head gasket up date - heavy hauler - 01-12-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.