Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Freightliner related help / Autoshift gets stuck in 10 gear

new reply
Autoshift gets stuck in 10 gear
10-07-2016, (Subject: Autoshift gets stuck in 10 gear ) 
Post: #18
hhow55 Offline
HMR-Contrinbuting V.I.P.  (1324 Likes)  *****

 		Posts: 1,211
Joined: Aug 2015
Thanks: 2107
Given 1324 thank(s) in 580 post(s)
RE: Autoshift gets stuck in 10 gear
This may not be your problem,but it worked for me one time. I found a lot of dust had accumulated on the ignition switch, behind the dash. all i did was clean it up, and my problem went away. It also could be a bad ignition switch, since it doesn't want to crank. Are you having a clicking noise when you try to crank engine over?

User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Autoshift gets stuck in 10 gear - Unilevers - 09-26-2016,
RE: Autoshift gets stuck in 10 gear - hhow55 - 10-07-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication