CM 870 Smoking white

[Ken Worth]

(01-25-2025 )tree98 Wrote:  Yea seems to be something going on with #4

You can run it on 1 cylinder, won't hurt it at all.

Amazon finally delivered the adapter for the leak test and I jumped on it real quick.

When I mount it on the rear fueling actuator (back of the engine) there is 0 bubbles. But when I mount it on the front one it has crazy big bubbles.
Would This mean it’s one or all of the front 3 injectors right?
On the cm870 there is 4 actuators, the very first one is fueling for the front 3 and the very last 4th in line, is for the rear 3 right? Or have I miss read the instructions on test procedure.

I was not abel to bar it by hand to see if it between A B or C because my damper markings are missing/and it got dark out side. I will do that tomorrow after finding the correct markings on the damper.