| aftertreatment issues |
| 04-16-2025, (Subject: aftertreatment issues ) Post: #5 | |||
| |||
| RE: aftertreatment issues Thank you all for the replies. I have replaced all the sensors. Haven't checked and cleaned the egr/piping, cooler. (doing that today) The filters were sent off to be cleaned by {third party} in Macon. The hoses were taken off and checked/cleaned. Truck is a 2019 389 X15 esn 80215316 ecm code is 10428.10. I did check for the latest software revision and only get esn not available on quickserve. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
aftertreatment issues - scott441974 - 04-15-2025, RE: aftertreatment issues - Mal4shtf - 04-15-2025, RE: aftertreatment issues - Rawze - 04-15-2025, RE: aftertreatment issues - RollinCoal - 04-15-2025, RE: aftertreatment issues - scott441974 - 04-16-2025 RE: aftertreatment issues - Rawze - 04-16-2025, RE: aftertreatment issues - scott441974 - 04-16-2025, RE: aftertreatment issues - Rawze - 04-17-2025, RE: aftertreatment issues - marek4792 - 04-16-2025, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.