Boost pressure
07-18-2025, (Subject: Boost pressure ) 
Post: #17
RE: Boost pressure
(07-17-2025 )Rawze Wrote:  ...
also.. you need to find out exactly what fault code.. the actual cummins fault code(s), both active and inactive that show in Insite, and not those FMI SPN codes that are too generic for troubleshooting it with half the time.
Codes are 0559 & 6864, both inactive at the moment but my trailer broke down this morning so I haven’t done any good pulls. I’m going to have Insite connected tomorrow morning on the 1st big pull and hopefully catch it in an active state
replyreply


Messages In This Thread
Boost pressure - Ravenwood - 06-25-2025,
RE: Boost pressure - Rawze - 06-26-2025,
RE: Boost pressure - Ravenwood - 06-26-2025,
RE: Boost pressure - Ravenwood - 07-08-2025,
RE: Boost pressure - Rawze - 07-09-2025,
RE: Boost pressure - Ravenwood - 07-09-2025,
RE: Boost pressure - Rawze - 07-09-2025,
RE: Boost pressure - Ravenwood - 07-15-2025,
RE: Boost pressure - Ravenwood - 07-15-2025,
RE: Boost pressure - Rawze - 07-15-2025,
RE: Boost pressure - Ravenwood - 07-15-2025,
RE: Boost pressure - Ravenwood - 07-17-2025,
RE: Boost pressure - Rawze - 07-17-2025,
RE: Boost pressure - Ravenwood - 07-17-2025,
RE: Boost pressure - Rawze - 07-18-2025,
RE: Boost pressure - Ravenwood - 07-18-2025,
RE: Boost pressure - Ravenwood - 07-18-2025
RE: Boost pressure - mikkhh - 07-09-2025,
RE: Boost pressure - marek4792 - 07-18-2025,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.