Odd issue…ecm overheating?

[dhirocz]

I spent some time digging around, and behind the cylinder head I found a section of harness that the A/C had been dripping on, that was rotted out… it made a loud crack as it bent from the wire jackets breaking. Ugh.
I replaced both the engine and forward chassis harnesses yesterday.
So far it’s running pretty good today. I erased the codes that were inactive. They were:
VGT turbo out of adjustment
Coolant level low
Throttle position sensor out of range

I’m going to drive it locally for the day and see what comes back.